Need help?Do you have a question about the Phantom v2012 and is the answer not in the manual?
General| Sensor Type | CMOS |
|---|---|
| Lens Mount | Nikon F |
| Storage | SD/SDHC/SDXC |
| Weight | 765 g |
| Shutter Speed | 30-1/8000 sec |
| Interface | USB 2.0 |
| Power Supply | EN-EL15a Rechargeable Li-ion Battery |
Details the capabilities of the Phantom UHS-12 Series digital high-speed cameras, including Gpx/s throughput and frame rates.
Outlines methods for camera setup and control: On-Camera Controls (OCC), Phantom Camera Control (PCC) software, and RCU.
Guides on preparing the computer, installing PCC software, and connecting the camera and CineMag IV.
Covers selecting cameras, defining parameters, arming, triggering, editing, reviewing, and saving cine files.
Details procedures for controlling the camera using On-Camera Controls and the Remote Control Unit (RCU).
Instructions for installing Phantom PCC software and an overview of its interface, including pre-installation steps.
Explains control tabs (Live, Play, Manager), PVP application overview, and camera control via PCC.
Covers key advanced settings, flash memory operations, and procedures for reviewing, editing, and saving cines.
Guides on setting camera parameters like Speed, Shutter, Frame burst, Period, Trigger, Resolution, Capture mode, and Auto BREF.
Recommends saving clips as Cine Raw files for metadata preservation and quality, covering individual and selected files.
Describes the Phantom RCU as a handheld controller for adjusting camera settings, viewing, and saving cines.
Details pinouts for BNC, Range Data, GPS, Remote, Power, Ethernet, and Capture connectors on Phantom vxx12 cameras.
To Next Page
