Phantom v2640 - Phantom PCC Software; PCC Software Overview and Setup

Chapter 6: Phantom PCC Software | 33
PHANTOM PCC SOFTWARE
PRE-INSTALLATION
Phantom Camera Control (PCC) software is certified to operate with the following
Microsoft Windows operating systems: Windows 7 Pro, Window 8.1 and Windows 10.
The computer and cameras must be associated with the same sub-network to
communicate with one another. Typically, the IP address 100.100.100.1 and subnet
255.255.0.0 are defined to the control computer’s network card. When multiple computers
are used to control the same camera, each computer requires a unique IP address.
For example, 100.100.100.1 (255.255.0.0), 100.100.100.2 (255.255.0.0), and so on.
PHANTOM CAMERA CONTROL (PCC) APPLICATION OVERVIEW
Phantom Camera Control software is built around a multi-layered work area that
includes the following:
TOOLBAR
The ‘Toolbar’ buttons provide quick access to the most frequently used functions.
Position the mouse over a button and wait a second for it to display a text box briefly
describing its function.
The latest version of Phantom PCC software can
always be downloaded from the Vision Research
website: www.phantomhighspeed.com