Vision Research, Inc. | Phantom Ultrahigh-Speed Camera Manual
2/6 IMAGE
The IMAGE page allows for
control of image processing
and video settings.
These image settings are
adjustments applied to Cine
Raw files as metadata.
MASTER GAMMA
Sets the relationship
between the signal level and brightness output of the image.
MASTER GAIN
Adjusts the overall signal level of the image in a linear manner.
MASTER BLACK
Adjusts the baseline black level. The default of 0 should produce images with black at
0 on a waveform monitor.
PA & PAO
The camera adds a Production Area (PA) with the specified frame size as an overlay
on the image. PAO is the Production Area Offset, which will move the Production Area
from the center of the image both vertically and horizontally. 0, 0 is the default.
ZOOM
Changes the zoom level of the video output.
COLOR BARS
Switches all video outputs to display SMPTE HD color bars.
VIDEO SYSTEM
Sets the video output to one of the valid video systems. The video outputs will change
immediately. However, the new video system must be confirmed to take effect.
To Next Page
Loading...
