Chapter 9: Accessories | 61
Any time the lens mount is removed, it’s important to verify the back focus. A set
of extra lens mount shims is included with every lens mount in order to adjust the
camera’s back focus when necessary.
INSTALLING A LENS MOUNT
Installing a new lens mount is simple. Remove the four 9/64 socket screws that are
attaching the current lens mount. Ensure all shims that are behind the mount are
transferred to the new mount.
In the case of the Canon mount, ensure the camera is powered down. Carefully align the
pins to the plug found behind the mount. Once lined up, use the same screws to fasten the
new mount in place.
To Next Page
Loading...
