If these conditions persist, contact you supplier or
phasetwo customer service department at, +1
770.985.1313
E-mail us at customerservice@phasetwoccs.com
for information on how to conduct a NER test.
Take every necessary precaution to prevent sliding, tipping,
bumping or dropping the unit.
If high evaporation rates are apparent under normal operating
conditions the vapor shipper may be losing its vacuum or a
defective neck plug or the neck tube has adsorbed ice.
Sweating and the formation of frost on the outer casing are indi-
cations that the vacuum integrity of the vapor shipper is not
normal.
5.
6.
7.
DO NOT attempt to fasten any device to the container.
Welding, brazing, and/or piercing of the container in any
manner will cause permanent damage and will void the limited
warranty.
Although the units are rugged, they can be damaged if mishan-
dled.
Ensure the shipment is upright at all times and when in use.
1.
2.
3.
4.
Care & Maintenance
www.phasetwoccs.com
5
To Next Page