EasyManuals Logo

PHICOMM FPA-501 User Manual

PHICOMM FPA-501
29 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #3 background imageLoading...
Page #3 background image
3
Important Safety Instructions
1. Do not open this product or attempt to service this product, it may expose you to
dangerous high voltage and other risks.
2. Do not operate this product near water.
3. Do not place or operate near or over radiator or heat register.
4. Do not expose this product to dampness, dust or corrosive liquids.
5. Do not connect this product and Disconnect from wall socket during a lightning or
thunderstorm.
6. Do not obstruct this product ventilation slots, as insufficient airflow may harm this product.
7. Do not put anything on this product.
8. Plug directly into wall socket AC 100-240V). Do not use an extension cord between this
product and the AC power source.
9. When plugging this product into wall socket, make sure that electrical socket are not
damaged, and no leakage for gas or water pipes to begin with.
10. Place the connecting cables carefully so people won't stumble or walk on it.
11. The powerline adapter should be operated from the type of power indicated on the
marking label. If you are not sure of the type of power available, consult the qualified
technician.
12. Unplug the Powerline Adapter from the mains and refer the product to qualified service
personnel for the following conditions:
If liquid has been spilled on the product
If the product has been exposed to rain or water
13. Unplug from the wall socket before cleaning. Use a damp cloth for cleaning. Do not use
liquid cleaners or aerosol cleaners.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the PHICOMM FPA-501 and is the answer not in the manual?

PHICOMM FPA-501 Specifications

General IconGeneral
BrandPHICOMM
ModelFPA-501
CategoryNetwork Card
LanguageEnglish