What to do if my Philco AB600TX Washer fails to operate?
If your Philco Washer isn't operating, there might be a few reasons. First, check the power supply connection to ensure it's properly connected. Second, verify that there isn't a power failure in your location. Also, make sure the door is completely and properly closed. Finally, confirm that the machine has been switched on.
Why Philco AB600TX does not fill with water?
If your Philco Washer isn't filling with water, several factors could be the cause. Begin by ensuring that the water supply is turned on. Check that the water pressure is at least 0.05MPa. Inspect the inlet hose to confirm it's not kinked, and ensure there isn't a water supply failure in your area. Also, verify that the program knob is correctly set and that the door is fully closed.
How to fix drainage failure in Philco Washer?
If you're experiencing drainage failure with your Philco Washer, there are a couple of things to check. First, make sure the drainage hose isn't blocked. Second, ensure that the end of the drainage hose is positioned below 100cm above the floor level.
Why is my Philco Washer vibrating strongly during spin cycle?
Strong vibrations during the spin cycle of your Philco Washer can be due to a couple of reasons. Check if all the packing fixing bolts have been removed. Also, ensure that the washing machine is placed on an even surface.
General| Power supply | 220-230V~/50Hz |
|---|---|
| Maximum working current (A) | 10 |
| Washing power (W) | 330 |
| Spinning power (W) | 650 |
| Heating power (W) | 1950 |
| Water pressure (MPa) | 0.03<P<1 IPX4 _ _ |
| Max. washing load (kg) | 5.5 |
| Spinning speed (r/min) | 600 |
| Washing program | 14 |
Weight and Dimensions| Size (HXDXW) (mm) | 850x550x595 |
|---|---|
| Weight (kg) | 76 |
Explains safety symbols (! and ) used in the manual and their importance for user safety.
Provides essential safety guidelines for operating the washing machine, covering electrical, handling, and child safety.
Covers initial setup, connection checks, and basic operational steps for the washing machine.
Instructions for removing all packing materials, including foam base and transport bolts, before operation.
Lists the included accessories such as manual, water hose, drainage holder, and plastic plugs.
Details how to level the washing machine using adjustable feet for optimal stability.
Guides on connecting the water inlet hose and setting up the water drainage hose correctly.
Checks and guidelines for connecting the washing machine to the power supply safely and correctly.
Explains how to select wash programs using the program knob.
Details how to set the desired washing temperature using the temperature knob.
Describes the compartments of the detergent distributor for different washing agents.
Explains the functions of the 'No Spin' and 'Anti-Crease Soak' buttons.
Describes the power button, power light, and door lock warning light.
Details wash programs for cotton fabrics, including prewash, normal, quick, and soften.
Details wash programs for synthetic fabrics, including normal, quick, and delicate washes.
Details wash programs for wool fabrics, including delicate wash, rinse, soften, and spin.
Instructions for connecting the power supply and ensuring clear water supply.
Guidance on sorting clothes, checking pockets, repairing garments, and washing labels.
Advice on choosing appropriate low-foam detergents for the washing machine.
Specifies the maximum washing load capacity for different fabric types.
Guides on evenly loading laundry, using the detergent drawer, and detergent cautions.
Details on setting the correct wash program and washing temperature.
Instructions for selecting function buttons and starting the washing process.
Provides tips for efficient energy and water usage during washing cycles.
Instructions for unplugging, cleaning the machine case, and detergent compartment.
Detailed steps for cleaning the washing machine's filter monthly.
Guidance on cleaning the water inlet and inlet water filter to prevent blockages.
Instructions for replacing vibration mounting locks when moving the machine.
Advice on preparing the machine for long periods of inactivity to prevent moisture and odors.
Lists common reasons why the washing machine might not start, like power or door issues.
Covers causes for the machine not filling with water, such as water supply or kinked hoses.
Addresses issues with continuous water supply or drainage failures.
Explains causes for excessive vibration during spin and operation stopping mid-cycle.
Identifies causes for excessive foam in the drum, usually related to detergent.
Details power supply voltage, working current, and heating power ratings.
Includes water pressure, washing/spinning power, load capacity, and spinning speed.
Provides the overall size (Height x Depth x Width) and weight of the washing machine.
Illustrates the electrical wiring diagram and identifies key components like motors, pumps, and controls.
To Next Page
