EasyManua.ls Logo

Philco PLCD06GGPWT - Automatic Fault Warnings and Solutions

Philco PLCD06GGPWT
80 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Yourmachineisequippedwiththesystemswhicharecapa-
bleofbothtakingnecessaryprecautionsandwarningyouin
caseofanybreakdownbymeansofcontinuousself-check-
ingduringwashingoperations.
(*)Seethechapterregardingmaintenanceandcleaningof
yourmachine.
73
CHAPTER -10: AUTOMATIC FAULT WARNINGS AND
WHAT TO BE DONE
E01
Thedoorof
yourmachineis
leftopen.
Thewaterpressure
orthewaterlevel
insidethemachine
islow.
Thepumpisfaultyor
pumplterisclogged
orelectricalconnec-
tionofthepumpis
faulty.
Yourmachinehas
excessiveamountof
water.
Yourmachinewilldischarge
waterbyitself.Pursuanttodis-
chargingoperation,turnoffyour
machineandunplugit.Turnoff
yourfaucetandcontactthenear-
estauthorisedservice.
Cleanthepumplter.Iftheproblem
persists,contactthenearestauthor-
isedservice.(*)
Turnonthefaucet.Mainswater
maybecut-off.Iftheproblemstill
continues,yourmachinewillstop
afterawhileautomatically.Unplug
themachine,turnoffyourfaucet
andcontactthenearestauthorised
service.
Closethemachinedoor.Ifyour
machinepersiststoindicatefault,
turnoffyourmachine,unplugit
andcontactthenearestauthorised
serviceimmediately.
E03
E02
E04
TROUBLE
CODE
POSSIBLE
FAULT
WHAT TO DO

Related product manuals