Philco PLCE06GGPWT - Water Discharge Issues or Detergent Residues

(**)Seethechapterregardinginstallationofyourmachine.
Unsatisfactory
washingresult.
Assoonasthema-
chineisloadedwith
water,waterdis-
charges.
Nowaterappears
inthedrumduring
washing.
Laundrieshave
detergentresidues
onthem.
Greyspotsappear
onthelaundries.
Waterbeinghard.
(Contaminated,lime
wateretc.)
Laundriesdistributed
inyourmachinenon-
homogenously.
Theendofwater
discharginghose
istoolowforthe
machine.
Nofault.Wateris
intheunseenpart
ofthedrum.
Non-dissolving
particlesofsome
detergentsmay
sticktoyour
laundriesaswhite
spots.
Thereasonforsuch
spotsmaybeoil,
creamorointment.
Adjusttheamountof
detergentbasedonthe
instructionofdetergent
manufacturer.
Spreadyourlaun-
driesinthema-
chineproperlyand
homogeneously.
Setthewaterdis-
charginghoseon
appropriateheight.(**)
(**)
Performanextra
rinsingbysettingyour
machineto“Rinsing”
programme,orclean
thespotsusinga
brushafteryourlaun-
driesdry.
Applythemaximum
amountofdetergent
instructedbythedeter-
gentmanufacturerinthe
nextwashingoperation.
71
CHAPTER -9: TROUBLESHOOTING
FAULT
POSSIBLE
CAUSE
TROUBLE-
SHOOTING