How to fix a Philips AVENT SCF902 Breast Pump that is not responding?
Ensure your Philips AVENT Breast Pump is correctly assembled and press the on/off button to switch it on. Also, check that the cables between the pump and the power socket are properly connected.
Why is there a lack of suction in my Philips AVENT SCF902 Breast Pump?
To address a lack of suction in your Philips AVENT Breast Pump, verify that all components are correctly assembled and the valve is properly positioned. Ensure the cap, diaphragm, and Let-down Massage Cushion are securely fitted to the pump body to create a perfect seal. Check that the silicone tube is firmly connected to the cap and the motor without twisting. Note that low air pressure in your region may also affect suction.
What to do if my Philips AVENT Breast Pump is not expressing milk?
Ensure that your Philips AVENT Breast Pump is assembled correctly and that suction is being created. Relax and try again, as expression may improve with practice.
What to do if Philips AVENT SCF902 Breast Pump light is flashing abnormally?
If the five lights on your Philips AVENT Breast Pump are flashing non-stop, switch the pump off and check that all components are correctly assembled. If the issue persists after reassembling and restarting, further assistance may be needed.
Why does my breast area hurt when expressing with Philips AVENT SCF902?
If you experience pain in the breast area when expressing with your Philips AVENT Breast Pump, it may be because you are pumping too hard. Reduce the suction intensity by pressing the suction decrease button to a comfortable mode.
What to do if milk is drawn up the Let-down Massage Cushion of Philips AVENT SCF902 Breast Pump?
If milk is drawn up the Let-down Massage Cushion of your Philips AVENT Breast Pump, remove and refit the cushion, ensuring it is installed correctly and firmly. Also, try leaning lightly forward.
Why is my Philips AVENT SCF902 cracking or discoloring?
Combinations of detergents, cleaning products, sterilization solutions, softened water, and temperature fluctuations may cause the plastic of your Philips AVENT Breast Pump to crack or discolor. Avoid antibacterial or abrasive detergents/cleaners. If you find any cracks, stop using the pump immediately. Keep all components away from heat sources or direct sunlight to prevent discoloration. Note that food coloring can also discolor components, but this will not affect usage.
General| Brand | Philips AVENT |
|---|---|
| Model | SCF902 |
| Category | Breast Pump |
| Language | English |
To Next Page