17” CDT Color Monitor 107E7
19
Note: g: is the disk position for 105G7
Step 3: Press Enter into the next screen as shown Fig 3.
a. Input 14 byte digital Serial No. such as “11111111111111” as shown Fig 3.
b. Enter and press “F3” key to input Serial No. again as shown Fig 4. Enter
The Serial No. length is”14” as shown Fig 4.
c. If you correctly input, there will appear” The Barcode length: 14 is OK” as shown Fig 5.
d. And if you incorrectly input, there will appear “The Barcode length: 9 is NG” as shown Fig 6.
You have to input again.
Fig 3
Fig 4
To Next Page
Loading...
