17” CDT Color Monitor 107E7
71
set brightness 50%, set contrast for 25Fl at full white.
•
Full white luminance - 29 ± 4 fl (brightness: 50%, contrast: maximum).
•
5x5cm block luminance - 40 ± 5 fl (brightness: 50%, contrast: maximum), check at 9300K
only.
•
Raster light output (w/o video signal, brightness at 50%, contrast at 0%) -
< 0.3 fl (raster has to disappear when brightness set to 0%).
• Raster light output (w/o video signal, brightness at 100%, contrast at 0%) -
> 0.3 fl.
• Brightness uniformity - > 75% (9 block measurements for center to corner).
• Preset 9300K colour - x = 0.283 ± 0.015
y = 0.297 ± 0.015
• Preset 6500K colour - x = 0.313 ± 0.015
y = 0.329 ± 0.015
•
Preset sRGB colour - x = 0.313 ± 0.015, (brightness set at 23 ± 3 fl)
y = 0.329 ± 0.015.
•
White colour uniformity - <0.015 (contrast at maximum for center to corner).
•
Colour tracking - <0.020 (set contrast from 10fl to maximum).
• Moire - The clouding effect must not rise to disturbing levels in anywhere
of the screen with luminance setting from 15 to contrast 100%.
• Video blanking - During mode change or unstable input signal, the video will be
blanking for 1s to 2s, no switching behaviour is visible.
•
Local doming - Not allowed.
• Proximity - No on-screen interference can be seen, when two monitors are
placed side by side (distance: 30cm) and operate in different
modes.
4. Accessories
4.1 Cables
•
Power cord (option) - Length: 1.5 M +/- 50 mm
4.2 User’s manual
• 8 languages Quick Setup Guide.
4.3 CD-ROM
•
User’s manual, driver,……………..
To Next Page
Loading...
