R&D 2021-05-11 Page 3 of 7
2 INSTALLATION INSTRUCTIONS
2.1 Models covered by instruction
10BDL4551T
2.2 Ethernet connection
Use the LAN port to connect the screen to your network.
2.3 How to do a “Factory Reset”
Note: If the TV has not been set up before, the TV will power on in the” Install menu”,
shown below. The factory reset can then be skipped.
• Enter the Android menu. “Stop key, then Volume down key. Pincode 1-2-3-4
• Enter Settings – Signage Display – System Tools – Factory Reset – select
Factory reset and then OK.
• The screen will now reset to factory settings.
To Next Page
Loading...
