R&D 2021-05-11 Page 4 of 7
2.4 Initial Installation
2.4.1 Screen settings
• Power On TV
• Welcome: Select language and select Start
• Security Setting: Skip
• Signage Display Settings: select Manual Setup and Next
• Signage Display Name: Skip
• Remote Control: Skip
• Network Settings:
o Choose Wi-Fi or Ethernet
▪ Wi-Fi: connect to your Wi-Fi network and continue
▪ Ethernet: Enable Ethernet to continue
• Clone Media Files into Internal: Skip
• Setup Complete: Finish
• When CMND & Deploy shows:
• Enter the Android menu. “Stop key, then Volume down key. Pincode 1-2-3-4
• Follow the General Settings described in 2.4.2
To Next Page
Loading...
