6) Connect to Your PC
6.1 Turn off your computer and unplug its power cable.
6.2 Connect the monitor signal cable to the video connector on the back of your computer.
6.3 Connect the audio, microphone and USB to the ports on the back of your computer, if
any.
6.4 Plug the power cord of your computer and your monitor into a nearby outlet.
6.5 Turn on your computer and monitor. If the monitor displays an image, installation is
complete.
RETURN TO TOP OF THE PAGE
file:///E|/manual/english/150P/install/connect.htm (6 of 6) [12/13/1999 8:01:04 PM]
To Next Page
Loading...
