5
2. Setting up the moni-
tor
2.1 Installation
1
Package contents
*Micro HDMI-HDMI
AC/DC Adapter
*Protective case
*USB C-C
16B1P3300
Quick start
Register your product and get support at www.philips.com/welcome
Portable
Monitor
3000 Series
*Dierent according to region
Note
Use only AC/DC adapter model: Philips
ADPC1936.
2
Install the base
Caution
Place the monitor face down on a smooth
surface. Pay attention not to scratch or
damage the screen.
3
Connecting to your PC
A
B
or
1
2
3
4
or
or
1
AC/DC power input
2
Audio out
3
USB-C
4
Micro HDMI input
Note
The monitor is able to receive power and
video signal through the USB-C port. The
HDMI port serves as only a video signal
input for monitor, it cannot charge a
device. The monitor receives power from
the power adapter, if it is connected.
Connect to PC
1. Connect the power cord to the back
of the monitor rmly.
2. Turn o your computer and unplug
its power cable.
3. Connect the monitor signal cable to
the video connector on the back of
your computer.
4. Plug the power cord of your
computer and your monitor into a
nearby outlet.
5. Turn on your computer and monitor.
If the monitor displays an image,
installation is complete.
To Next Page
Loading...
