Philips 170B6 - Page 72

Connecting to Your PC
2) Connect to PC
(a) Turn off your computer and unplug its power cable.
(b) Connect the monitor signal cable to the video connector on the back of your computer.
(c) Plug the power cord of your computer and your monitor into a nearby outlet.
(d) Turn on your computer and monitor. If the monitor displays an image, installation is complete.
3) USB plug
file:///D|/My%20Documents/dfu/A7/english/170b6/install/connect.htm (5 of 6)2005-06-08 8:58:55 AM