To Next PageTo Next Page
Need help?Do you have a question about the Philips 170S5FG/00 and is the answer not in the manual?
General| Screen Size | 17 inches |
|---|---|
| Resolution | 1280 x 1024 |
| Panel Type | LCD |
| Aspect Ratio | 5:4 |
| Brightness | 250 cd/m² |
| Horizontal Scan Range | 30 - 82 kHz |
| Vertical Scan Range | 56 - 76 Hz |
| Pixel Pitch | 0.264 mm |
| Horizontal Viewing Angle | 160 degrees |
| Built-in Speaker(s) | No |
| On Screen Display (OSD) | Yes |
| Plug and Play | Yes |
| Power Consumption (standby) | 2 W |
| Connectivity | VGA |
Critical components identified for safety; use of substitutes.
Details the pin configuration of the D-SUB signal connector.
Lists included accessories with their descriptions.
Lists acceptable defect levels for different defect types.
Details video and sync signal inputs and their specifications.
Steps for accessing factory mode and auto-adjustments.
Lists necessary PC and software for firmware update.
Details the pin assignment of the D-Sub connector.
Step-by-step guide to reprogramming the Analog DDC IC.
Instructions on how to save DDC data to a text file.
Specifications related to electrical properties and interfaces.
Details physical characteristics like controls, dimensions, and tilt.
Outlines acceptance testing criteria and serviceability standards.
Specifications for the LPL LCD panel.
Specifications for the QDI LCD panel.
Specifications for the CPT LCD panel.
Specifications for the Hannstar LCD panel.
Lists safety, EMI, ergonomics, and compatibility certifications.
Lists the pin configuration for the D-Sub connector.
Details the adjustable functions available through the analog OSD.
Specifies mode storing capacity and preset timings.
Describes power consumption and status indication.
Conditions for evaluating visual characteristics like signal and lighting.
Describes how to test and ensure brightness uniformity.
Explains the procedure and formula for checking cross talk.
Lists the controls available on the monitor's front and rear.
Specifies operating and storage limits for temperature, humidity, and altitude.
Specifies Mean Time Between Failures (MTBF) for the monitor.
Philips' policy on acceptable pixel and subpixel defects.
Application requirements for the Hi-Pot test.
Lists required equipment and connection setup for safety tests.
Precautions against fire and shock hazards during servicing.
Precautions and procedures to avoid X-radiation exposure.
Procedure for testing leakage current with the unit plugged in.
