Philips 170S5FG/00 - GENERAL PRODUCT SPECIFICATION; Test conditions

55
170S5 LCD
GENERAL PRODUCT SPECIFICATION
17 inch LCD Monitor
TYPE : 170S5FG/00
BRAND : PHILIPS
8639 000 15092
2004-01-16
2004-01-16
590
15
24
JERRY CHEN
Go to cover page
# Resolution H-Frequency Pixel rate V-Frequency Comment
1 640X350 31.5KHz 25.175 70HzIBMVGA10h
2 720X400 31.5KHz 28.322 70HzIBMVGA3h
3 640X480 37.5KHz 31.501 75Hz
4 640X480 35.0KHz 30.24 67Hz
5 640X480 31.5KHz 25.175 60Hz
6 800X600 35.2KHz36 56Hz
7 800X600 46.9KHz 49.498 75Hz
8 800X600 37.9KHz40 60Hz
9 832X624 49.7KHz 57.28 75HzMAC
According to VESA power saving signal. TCO03 power saving requirement
EPA energy star requirement
(Power Switch Off)
For digital input power consumption is less 1W
(In non-DMPM recoverable off mode)
3.6 Display identification
3.6.1 In accordance with VESA Display Channel Standard V1.0 and
having DDC-2B capability.
4.0 Visual characteristics
4.1 Test conditions
Unless otherwise s pecified, this specification is defined under the
following conditions.
(1) Input signal: As defined in 3.3, 1280 x 1024 non-interlaced mode
(80K/75Hz), signal sources must have 75 ohm
output impedance.
(2) Luminance setting: Contrast 50% , brightness :100%
(3) Warm up: more than 30 minutes after power on with signal
supplied.
(4) Ambient light: 400 -- 600 lux.
(5) Ambient temperature: 20 +/- 5 °C
4.2 Resolution
Factory preset modes (15 modes)