170S5 LCD
Connection to PC
Go to cover page
5
(A) Turn off your computer and unplug its power cable.
(B) Connect the monitor signal cable to the video connector on
the back of your computer.
(C) Plug the power cord of your computer and your monitor into
a nearby outlet
(D) Turn on your computer and monitor. If the monitor displays
An image, installation is complete.
Connecting to Your PC
1)Plugthepowercordintomonitorfirmly
2)Clipthepowercordandsignalcabletogether
for cable management
Note: If you use an Apple Macintosh, you need to connect the
Special Macadaptertooneendofthemonitorsignalcable
3) Connect to your PC
To Next Page
Loading...
