Note: If you use an
Apple Macintosh
TM
,
you need to connect
the special Mac
adapter to one end of
the monitor signal
cable.
2) Connect to PC
(a) Turn off your computer and unplug its power cable.
(b) Connect the monitor signal cable to the video connector on the back of your
computer.
(c) Plug the power cord of your computer and your monitor into a nearby outlet.
(d) Turn on your computer and monitor. If the monitor displays an image,
installation is complete.
file:///D|/L/english/170s4fgbs/install/connect.htm (3 of 4) [4/28/2003 1:34:32 PM]
To Next Page
Loading...
