Note: If you use an Apple Macintosh, you
need to connect the special Mac adapter to
one end of the monitor signal cable.
2) Connect to PC
(a) Turn off your computer and unplug its power cable.
(b) Connect the monitor signal cable to the video connector on the back of your
computer.
(c) Plug the power cord of your computer and your monitor into a nearby outlet.
(d) Turn on your computer and monitor. If the monitor displays an image,
installation is complete.
file:///D|/My%20Documents/dfu/A7/english/170s6/install/connect.htm (3 of 4)2005-06-08 9:04:38 AM
To Next Page
Loading...
