Philips 170X6 - Page 14

Product Information
• Input impedance
- Video
75 ohm
- Sync
2.2K ohm
• Input signal levels 0.7 Vpp
• Sync input signal
Separate sync
Composite sync
Sync on green
• Sync polarities Positive and negative
• Video interface
Dual input: D-Sub (analog) and DVI-D (digital) are available and user
selectable
• Light Frame
TM
Brightness and sharpness enhancement
Audio
• Loudspeaker
4W Stereo Audio (2W/channel RMSx2, 300 Hz-14 kHz, 16 ohm,
THD=10%, PMPO 32 Watts)
• Headphone connector 3.5mm mini jack
• Input signal connector 3.5mm mini jack
• Stand-alone audio output
Whether there is a video display or not as long as there is an audio
input, the audio output is always functional.
Optical characteristics
• Contrast ratio 600:1 (typ.)
• Brightness
250 cd/m
2
(typ.)
• Peak contrast angle 6 o'clock
• White Chromaticity
x: 0.283 y: 0.297 (at 9300°K)
x: 0.313 y: 0.329 (at 6500°K)
x: 0.313 y: 0.329 (at sRGB)
• Viewing Angle (C/R>5)
Upper 80° (typ.)
Lower 80° (typ.)
Left 80° (typ.)
Right 80° (typ.)
• Response time
8 ms(typ.)
* This data is subject to change without notice.
RETURN TO TOP OF THE PAGE
Resolution & Preset Modes
file:///D|/My%20Documents/dfu/X6_model/english/170x6/product/product.htm (8 of 12)2005-06-27 1:27:06 PM