5
2. Setting up the monitor
Connecting to your PC
Kensington anti-thief lock
AC power input
DVI-D input (available for selecting
model)
VGA input
HDMI input
HDMI audio out
Connect to PC
1. Connect the power cord to the back of
the montior firmly.
2. Turn off your computer and unplug its
power cable.
3. Connect the monitor signal cable to the
video connector on the back of your
computer.
4. Plug the power cord of your computer
and your monitor into a nearby outlet.
5. Turn on your computer and monitor. If
the monitor displays an image, installation
is complete.
2.2 Operating the monitor
Front view product description
: To access OSD menu.
: Return to previous OSD level.
: To adjust the volume (only available
for HDMI input)
: To switch monitor’s power on and off.
: To adjust the OSD menu.
: To change the signal input.
: SmartImage Lite. There are 3 modes
to be selected: Standard, Internet and
Game.
To Next Page
Loading...
Need help?
General
