Resolution notification
This monitor is designed for optimal
performance at its native resolution, 1600 ×
900 @ 60 Hz. When the monitor is powered
on at a different resolution, an alert is displayed
on screen: Use 1600 × 900 @ 60 Hz for best
results.
Display of the native resolution alert can be
switched off from Setup in the OSD (On
Screen Display) menu.
Physical Function
Tilt
2.3 Remove Base Stand
Remove the Base Stand
Before you start disassembling the monitor
base, please follow the instructions below to
avoid any possible damage or injury.
1. Place the monitor face down on a smooth
surface, taking care to avoid scratching or
damaging the screen.
2. Press the locking clips to detach the base
stand away from the base column.
1
3. Detach the base column.
2
To Next Page
Loading...
