Channel Scan
Use this function to nd and store all available •
channels automatically in both digital and analog
mode.
Press MENU + UP / DOWN button to ►
select TV.
Press OK + UP / DOWN button to ►
select Channels.
Press OK + UP / DOWN button to ►
select Channel Scan.
Press OK button to execute the Channel ►
Scan.
Channel Scan scan both the digital and »
analog channels, rst scan digital channels
and analog channels last.
Channel Scan will erase all old stored
»
channels scanned by previous execution.
Digital channel number will assign by
»
LCN (Logical Channel Number) if LCN
is exist.
Digital channel which no LCN or LCN
»
con ict will assign from 800 to 899.
Analog channels will assign from 901
»
to 999, if have channel name, will assign
from 901, others will assign by frequency,
2 7 %
Exit
Cancel
S t a t u s : S c a n n i n g .
A n a l o g C h a n n e l s : 0
D i g i t a l C h a n n e l s : 0
1st Audio and 2nd Audio
(Digital TV only)
The Audio function allows selection of a •
preferred language.
If audio data in a selected language is not
•
broadcast, the default language audio will be
played.
When the languages you selected as the primary
•
for Audio Language are not supported, you can
select language in secondary category.
Press MENU + UP / DOWN button to ►
select TV.
Press OK + UP / DOWN button to ►
select 1st Audio and 2nd Audio.
Press LEFT / RIGHT button to select the ►
item.
To Next Page
Loading...
