RETURN TO TOP OF THE PAGE
INPUT SIGNAL SELECTION (Not available in all models)
INPUT SIGNAL SELECTION determines what you see on the screen. The default setting is INPUT A, but if
the video input signal is different that the output signal, you may want to change it to INPUT B.?
1) Press the
button on the monitor. The MAIN CONTROLS window appears.
2) Press the
button until INPUT SIGNAL SELECTION is highlighted.
3) Press the button. The INPUT SIGNAL SELECTION window appears.
4) Press the or button to highlight INPUT B or INPUT A.
5) Press the
button to confirm your selection and return to the MAIN CONTROLS window. CLOSE
file:///D|/rita/LF2/LF2/highendnew/multi_manual/english/OSD/osd_cont.htm (4 of 26) [1/7/2002 11:02:37 AM]
To Next Page
Loading...
