Meridian 3
77
x Anti-interference between two monitors,
Monitors must have anti-interference methods(coding ..etc) to prevent monitors to talk to each other
power sensor Functional behavior
Time Period 60sec 60sec ~ 180sec 180sec ~
PowerSensor No ACTION
Lower down backlight
brightness
Backlight & LCD panel
shutdown
Power Saving 0 50% 80%
The following set-up’s will be supported:
Monitor 1
Monitor 2
Top view
User 1
User 2
Fig. 2: 2 monitors standing back to back.
The monitors may influence each other. So Monitor 1 may produce unexpected brightness-switches
in monitor 2 (and vice versa). Furthermore, user 1 could perhaps (via monitor 1) influence the
powersensor readout on monitor 2.
Fig. 3: set up of multiple monitors under an angle
.
To Next Page
Loading...
