What to do if my Philips LCD TV is on, but there is no picture?
If your Philips LCD TV is on but shows no picture, first check that the antenna is properly connected to the TV. Also, ensure that you have selected the correct device as the monitor source.
What to do if my Philips LCD TV monitor does not switch on?
If your Philips LCD TV monitor isn't switching on, try these steps: First, disconnect the power cable from the outlet, wait a minute, and then reconnect it. Also, make sure the power cable is securely connected to the monitor.
What to do if there is sound but no picture on Philips 221TE4L?
If you are getting sound but no picture on your Philips LCD TV, verify that the picture settings are correctly configured.
What to do if there is a picture but the sound quality is poor on Philips 221TE4L LCD TV?
If you have a picture but the sound quality is poor on your Philips LCD TV, make sure that the sound settings are correctly configured.
What to do if there is a picture but sound comes from one speaker only on Philips 221TE4L LCD TV?
If you're only getting sound from one speaker on your Philips LCD TV, check that the sound balance is set to the center.
What to do if the picture does not fit the screen on my Philips LCD TV?
If the picture doesn't fit the screen on your Philips LCD TV (it's too big or small), try using a different picture format.
What to do if my Philips 221TE4L LCD TV remote control is not working properly?
If your Philips LCD TV remote control isn't working, first ensure the batteries are correctly inserted, matching the + and - orientation. If that doesn't work, replace the batteries, as they may be weak or flat. Finally, try cleaning both the remote control and the sensor lens on the TV.
Why is there poor picture quality from connected devices on my Philips LCD TV?
If you're experiencing poor picture quality from devices connected to your Philips LCD TV, first ensure that the devices are properly connected. Also, verify that the picture settings are correctly configured.
Why is the computer display on my Philips 221TE4L LCD TV not stable?
If the computer display on your Philips LCD TV is unstable, check that a supported resolution and refresh rate is selected on the computer. Also, set the monitor picture format to unscaled. Make sure that all cables are properly connected and the sound is not muted.
How to fix poor monitor reception from antenna connection on Philips 221TE4L?
To improve poor monitor reception from an antenna connection on your Philips LCD TV, first ensure the antenna is properly connected. Loudspeakers, ungrounded audio devices, neon lights, high buildings, and other large objects can affect reception. Try changing the antenna's direction or moving devices away from the monitor. If only one channel has poor reception, fine-tune that specific channel.
General| Aspect Ratio | 16:9 |
|---|---|
| Response Time | 5 ms |
| Brightness | 250 cd/m² |
| Contrast Ratio (Typical) | 1000:1 |
| Built-in Speakers | Yes |
| Screen Size | 21.5 inches |
| Resolution | 1920 x 1080 |
| Viewing Angle (Horizontal) | 170° |
| Viewing Angle (Vertical) | 160 degrees |
| Connectivity | VGA, DVI |
| Input Ports | 1 x VGA, 1 x DVI |
Details warranty coverage, acceptable pixel defect levels, and product copyright.
Covers risks of electric shock, fire, injury, overheating, and proper handling.
Guidelines for cleaning the screen and environmentally friendly disposal of the product.
Details on ANTENNA, SCART, Component, HDMI, VGA, PC Audio, USB, and COMMON INTERFACE ports.
Details on HEADPHONE, SPDIF OUT, HDMI, SERV. U, PC IN, COMMON INTERFACE, and USB ports.
Instructions for installing a CAM and configuring Philips EasyLink for HDMI-CEC control.
Identifies and explains the functions of the buttons located on the side of the monitor.
Details the purpose of each button on the remote control for operating the TV.
Instructions for switching the monitor on, off, or into standby mode using the monitor or remote.
Guides on how to change TV channels and select input sources for connected devices.
Instructions for increasing, decreasing, and muting the monitor's audio volume.
Lists compatible computer and video resolutions and refresh rates for optimal display.
Details power consumption, mains voltage, and VESA mounting specifications.
Guides on searching and storing TV channels automatically or manually.
Instructions for updating channel lists, renaming, rearranging, and testing digital reception.
Accessing menus, using smart settings, and manually adjusting picture and sound parameters.
Managing channels, teletext, EPG, languages, subtitles, and TV clock settings.
Setting sleep timers, daylight saving, locking channels, and parental ratings.
Connecting USB devices, browsing photos, music, and managing slideshows.
Explains pixel defect types, acceptable levels, and warranty conditions for repairs.
Solutions for general monitor issues, channel problems, and picture/sound quality errors.
Troubleshooting unstable computer display and guidance on contacting Philips support.
To Next Page