Need help?Do you have a question about the Philips 22HFL3350D/10 and is the answer not in the manual?
General| Display Type | LCD |
|---|---|
| Brightness | 250 cd/m² |
| Contrast Ratio | 1000:1 |
| Response Time | 5 ms |
| HDMI Ports | 2 |
| USB Ports | 1 |
| Audio Output | 2 x 3W |
| Contrast Ratio (typical) | 1000:1 |
| Dynamic Contrast Ratio Marketing Name | Dynamic Contrast |
| Comb Filter | 3D |
| USB 2.0 Ports Quantity | 1 |
| SCART Ports Quantity | 1 |
| Common Interface (CI) | Yes |
| Common Interface Plus (CI+) | No |
| RMS Rated Power | 6W |
| Number of Loudspeakers | 2 |
| VESA Mounting | Yes |
| VESA Mounting Interfaces | 100 x 100 mm |
| Product Color | Black |
| Aspect Ratio | 16:9 |
| Refresh Rate | 60 Hz |
| Built-in Speakers | Yes |
| Screen Size | 22 inches |
| Resolution | 1366 x 768 |
| Screen Format Adjustments | 16:9, 4:3, Zoom |
| Tuner Type | Analog, Digital |
| Digital Signal Format System | DVB-C, DVB-T |
General safety precautions to prevent electric shock, fire, injury, and overheating.
Methods to clean and maintain the TV screen to prevent damage.
Guidelines for environmentally responsible disposal of the product and batteries.
Diagram and description of various input/output connectors on the TV.
Describes the remote control for setup and configuration purposes.
Details about a remote control for institutional/business solutions and smart card settings.
Guidance on ideal viewing distance, placement, and connecting devices.
Instructions and warnings for securely mounting the TV on a wall using a VESA bracket.
Steps to connect the antenna cable to the TV's antenna connector.
Instructions for connecting the power cord safely, verifying voltage.
Procedure for inserting batteries into the remote control.
Information on using a Conditional Access Module (CAM) for digital services.
Steps to access the setup menu using guest or setup remote controls.
Procedure to enable or disable the BDS Hotel Mode.
Instructions to lock or unlock the TV's physical keyboard buttons.
Options for configuring remote control behavior, including locking buttons.
Settings for OSD display, welcome messages, CI slot, teletext, and MHEG.
Configure the TV's volume level when it is switched on.
Set the maximum allowable volume level for the TV.
Configure the TV to tune to a specific channel upon power-on.
Define the TV's power-on behavior (On, Standby, Last status).
Select power saving options for standby mode (Green, Fast).
Configure clock display settings, including brightness and time synchronization.
Configure the TV to switch sources based on SCART signal detection.
Enable or disable automatic detection of USB devices.
Configure audio and video output to relevant AV connectors.
Disable video display on channels used for radio or music.
Option to save all configured settings.
Copy TV configuration data from a USB stick to the TV.
Copy TV configuration data from the TV to a USB stick.
Troubleshooting steps for issues where the TV does not communicate with external terminals.
Solutions for 'No picture' issues, checking blank current channel feature.
Resolving 'F' character display, guest mode remote issues, BDS mode, and remote control problems.
To Next Page