Philips 226E7 - Operating the Monitor

6
2. Setting up the monitor
Connecting to your PC
123
1
2
4
7
6
5
3
4
4
AC/DC power input
VGA input
DVI input
HDMI or MHL input
Earphone output
Audio input
Kensington anti-theft lock
Connect to PC
1. Connect the power cord to the back
of the monitor firmly.
2. Turn off your computer and unplug
its power cable.
3. Connect the monitor signal cable to
the video connector on the back of
your computer.
4. Plug the power cord of your
computer and your monitor into a
nearby outlet.
5. Turn on your computer and monitor.
If the monitor displays an image,
installation is complete.
2.2 Operating the monitor
Front view product description
Press more than 3 seconds
to switch display power
OFF.
Press to switch display
power ON
Access the OSD menu .
Confirm the OSD
adjustment.
Adjust the speaker volume.
Adjust the OSD menu.
Change the signal input
source.
Adjust the OSD menu.
SmartImage Lite. There are
four modes to be selected:
Standard, Internet, Game
and LowBlue Mode.
Return to previous OSD
level.