10
FACTORY RESET
Y
our TV can be reset to the original
factory settings by performing the
following steps.
Press the MENU button on the
remote control to see the onscreen
menu.
Press the CURSOR DOWN button to
highlight the INSTALL menu, then press
CURSOR RIGHT to enter.
Press the CURSOR DOWN button
repeatedly to highlight the FACTORY
RESET control, then press CURSOR
RIGHT to enter.
Press CURSOR DOWN to select “YES” to
reset the original factory settings.
Press the MENU button repeatedly to clear
the menu from the screen.
1
2
3
4
5
If you reset the TV to the factory settings,
all your present setting on picture, audio,
Close Caption and other feature settings
will be erased and replaced by the
manufacture’s default settings. However,
your AutoLock access code will not be
erased. Please refer to page 19 for details.
HELPFUL HINT
To Next Page
Loading...
