Philips 246V5LSB/93 - General Product Specifications; Product Profile and Panel Details

Meridian 3
83
17. General Product Specification
FOREWORD
This specification describes a multi-scan color TFT LCD monitor.
All optical characteristics are determined according to panel specification after warming up longer than 30
minutes.
PRODUCT PROFILE
EDID header
Data for EDID & .inf file
Philips 246V5
1 User visible strings on .inf file Philips 246V (24inch Wide LCD MONITOR 246V5)
2 Manufacturer ID ( EDID data) PHL
3 Product ID, "xxxx" 4 codes MSB(byte 12): C0
LSB (byte 11): B3
4 maximum resolution 1920x1080
5 Horizontal Frequency Range 30~83 KHz
6 Vertical Frequency Range 56~76Hz
7
Monitor Name (13 characters
max.) Philips 236V5
236V5 :
AUO
Type NR. : M240HW01 VD
Resolution : 1920 x 1080 (WSXGA+)
Outside dimensions : 556.0(H)x323.2(V)x11.5(D).
Pitch (mm) : 276.75 (per one triad) ×276.75
Color pixel arrangement : RGB vertical stripe
Display surface : Anti-Glare, 3H
Color depth : 16.7M (6 bit Hi-FRC)
Backlight : LED
Active area (W x H) : 509.184(H) x 286.416(V) mm
View angle (CR=10) : =170 for Right/Left (Typ)
: =160 for Up/Down (Typ)
Contrast ratio : 1000:1 (Typ)
White luminance : 250(Typ.)
Color gamut : >=72%
Gate IC : N/A
Source IC : N/A
Response time : Tr + Tf <=5 ms (Typ)
Vertical frequency range : 50~75Hz
Scanning frequencies
Hor. : 30 – 83 K Hz
Ver. : 56 - 76 Hz
Video dot rate: < 210 MHz for VGA and < 170 MHz for DVI
, warning message must be
displayed while over 165 MHz (supplier to provide accurate scaler bandwidth number)
Power input: 90-264 V AC, 50/60  2 Hz
Functions:
(1) D-SUB analog R/G/B separate inputs, H/V sync separated, Composite (H+V) TTL level,
(2) SOG sync: a. Sync select: H + V
b. Sync select: SERR
(3) DVI digital Panel Link TMDS inputs, HDCP supported.