92
Meridian 3
y = 0.297 ± 0.006
6500K/sRGB x = 0.313 ± 0.006
y = 0.329 ± 0.006
PerfecTune II
sRGB x = 0.313 ± 0.006
y = 0.329 ± 0.006
PerfecTune II
Quality Inspection specification:
CIE coordinates (x,y)
9300K x = 0.283 ± 0.030
y = 0.297 ± 0. 030
Note 1
6500K/sRGB x = 0.313 ± 0. 030
y = 0.329 ± 0. 030
sRGB x = 0.313 ± 0. 030
y = 0.329 ± 0. 030
Note 1：Test in 9 points pattern，9300K color temperature x-shift or y－shift must be less than 15 at center，the
x-shift or y－shift in 9 points should be judged by panel Spec.
MECHANICAL CHARACTERISTICS
Cosmetic -
Philips ID
Mechanical data files -
ProE files required
Location of Philips logo -
Per Philips make-up sheet
Gap between panel and front bezel
15"~19": <0.8mm, 19"W:<1.0mm, 20W~23"W: <1.2mm, 24"W: <1.4mm
Location of Control icons -
Location of Control icons -
Per Philips Graphic sheet
Color for resin/paint -
Per Philips make-up sheet
Fire enclosure request
Shielding Cover should fulfill international standard
Resins
RoHS required
WEEE required.
Resin type/selection refer to Project Book Section 7.2 Plastic material.
If paint is used
RoHS required
WEEE require
If new painting type need to implement, refer to UN-D 1235.
To Next Page
Loading...
