39
Meridian 3
10. Mechanical Instructions
Note: 247E4LHSB/00 have no speakers, so some
steps are needless for it.
Step 1: Remove Bezel and Rear cover with
stand and HINGE ASSY
1. Place the monitor face on a safe surface, and open
the latches and along the red arrowhead direction
as the picture to open other latches. Than remove
the screws and the pin on the scaler board.
2. Disconnect the connector to remove the Rear cover.
Step 2: Remove the scaler board
1. Disconnect all the connectors and remove the screw
to remove the scaler board.
Needless for 247E4LHSB/00
To Next Page
Loading...
