Philips 24E1N3300A - Setting up the Monitor; Installation

5
2. Setting up the
monitor
2.1 Installation
1
Package contents
*HDMI
AC/DC Adapter
*USB C-C
*USB C-C/A
*USB C-A
24E1N3300A
3000 Series
Monitor
Quick start
Register your product and get support at www.philips.com/welcome
*Dierent according to region
Note
Use only AC/DC adapter model: Philips
ADPC20120.
2
Install the base
1. Place the monitor face down on a
smooth surface. Pay attention not to
scratch or damage the screen.
2. Hold the stand with both hands.
(1) Gently attach the base to the
stand.
(2) Use your ngers to tighten the
screw located at the bottom of
the base.
(3) Use a screwdriver to tighten the
screw located at the bottom of
the base, and secure the base to
the stand tightly.
(4) Gently attach the stand to the
VESA mount area until the latch
locks the stand.
1
2
3
4
Caution
Place the monitor face down on a
smooth surface. Pay attention not to
scratch or damage the screen.