No Power
• Check the TV power cord. Unplug the TV, wait t 0 seconds, then reinsert
the plug into the outlet and push the POWER button again.
• Check that the outlet is not on a wall switch.
• Be sure the fuse is nm blown on the AC power strip, if one is being used.
No Picture
• Check antenna connections. Are they properly secured to the TV's ANT
75_ plug?
• Check the TUNER MODE control tbr the correct tuner setting.
• Try running the Auto Program feature m find all available channels.
• Press the AV button on the remote to make sure the correct signal source is
selected (FRONT or Current Channel).
No Sound
• Check the VOLUME buttons.
• Check the MUTE button on the remote control.
• If you're atrempting to hook up auxiliary equipment, check the audio jack
connections located (m the fr(mt of the TV.
Remote Does Not Work
• Check the batteries. Ifnecessar): replace them with AA Heavy Duty (Zinc
Chloride) or Alkaline batteries.
• (:lean the remote control and the remote control sens(xr window (m the TV.
• Check the TV power cord. Unplug the T\q wait 10 seconds, then reinsert
the plug into the outlet and push the POWER button again.
• Be sure the fuse is nm blown on the AC power strip, if (me is being used.
• Check to be sure the TV outlet is not on a wall switch.
TV Displays Wrong Channel or No Channds Above 13
• Repeat channel selection.
• Add the desired channel numbers (using the CHANNEL EDIT control) into
the TV's memory.
• Check m be sure the TUNER MODES arc set m the (:ABLE option and run
the Aura Program feature to find all available channels.
To Next Page
