Philips 273E3LSW/93 - DDC and EDID Operations; DDC;EDID Setup and Tools

45
Meridian 3
13. DDC Instruction
1. An i486 (or above) personal computer or compatible.
2. Microsoft operation system Windows 95/98/2000/XP.
3. LPT port driver “PORT95NT.exe” and EDID tool “VgaSinglePort.exe”
4. EDID Board (715GT034-B) x1,
5. LPT cable (male to male) x1, VGA cable x 1
6. 12V DC adapter
7. EDID data
13.1 Connect the ISP board, PC and monitor as follow:
13.2 Install LPT drive
1. Double click the icon to install the driver.
2. Restart PC after installation.
13.3 Prepare the EDID written
1. Change the EDID files name as below rule.
Anolog EDID WA.dat Digital EDID WD.dat
2. Copy these three files to one folder named as Philips 273E3L which must contains “config.ini” file.