Philips 273E3LSW/93 - Page 73

Meridian 3
73
x > = 80 gloss units
Gap, step of F/C and R/C
Gap between bezel and panel
˖
1.2 (Typ.) mm
Gap between F/C and R/C
˖
0.4mm
Step of F/C and R/C
˖
-0.3mm Left ˈ right ,top, Bottom , corner : 0.5mm
Monitor slant
A B
Monitor slant ˖災A-B災 7mm
Gap of Bezel opening around display area
H烉焋L-R焋1.5 ϩ V烉焋U-D焋1.5 ϩ
Tilt and swivel base
x Tilt angle : -4 q +1/-1 q (forward)
+19 q +1/-1q (backward)
x Swivel angle : nil
x High Adjustment : nil
x
Portrait Display : nil
Kensington Lock
x Must meet Kensington_slot.spec “TYE-M0004”.
x MMD request metal plate in Kinsington hole.
Label
x Regulatory label / Carton label should follow Philips requirement.
x China RoHS label.
x Detail document refer to Philips Engineering Reference Book.
Product dimension / Weight (( Refer to Philips approved SHT 191/SHT560 ) )
x Unit dimension : 642 mm (W) * 440 mm(H) * 227 mm(D)
x Packed unit dimension: 562 mm(W) * 482mm(H) * 130mm(D) for WW
: 562 mm(W) * 492 mm(H) * 145 mm(D) for China
x Net weight : 6.98.Kg (NO Including I/F cable ? g)
x Gross weight : 8.1 Kg for WW
: 8.1 Kg for China