- When you unplug the power cable, always pull the plug, never
pull the cable.
For 22PFx4209
Although this TV has a very low standby power consumption,
unplug the power cable to save energy if you do not use the TV
for a long period of time.
2.5
Antenna cable
Insert the antenna plug firmly into the
ANTENNA
socket at the
back of the TV.
You can connect your own antenna or an antenna signal from
an antenna distribution system. Use an IEC Coax 75 Ohm RF
antenna connector.
Use this antenna connection for DVB-T and DVB-C input
signals.
2.6
Satellite dish
Attach the satellite F-type connector to the satellite connection
SAT
at the back of the TV.
- Only for TVs with a built-in satellite tuner.
5
To Next Page
Loading...
Need help?
General
