Replacement
Replace the shaving heads every two years for optimal shaving results.
Replace damaged or worn shaving heads with HQ56 Philips Shaving
Heads only.
1 Switch off the shaver. Remove the mains plug from the wall socket
and pull the appliance plug out of the shaver.
2 Press the release button (1) and remove the shaving unit (2).
3 Turn the wheel anticlockwise (1) and remove the retaining frame (2).
4 Remove the shaving heads and place new ones in the shaving unit.
5 Put the retaining frame back into the shaving unit, push it down (1)
and turn the wheel clockwise (2).
6 Put the shaving unit back onto the shaver.
2
1
1
2
ENGLISH10
To Next Page
Loading...
