Philips 3000 series - Page 20

1 The shaving unit symbol lights up orange
continuously.
2 Switch off the appliance and make sure it is
disconnected from the wall socket.
3 Press the release button to open the shaving
unit. Pull the shaving unit off the appliance.
2
1
4 Turn the lock anticlockwise and remove the
retaining frame.
5 Remove the shaving heads from the shaving
unit and throw them away.
6 Place new shaving heads in the shaving unit.
Note: Make sure that the projections of the
shaving heads fit exactly into the recesses of
the shaving head holder.
1
2
7 Put the retaining frame back into the shaving
unit and turn the lock clockwise.
20
English