4-1 A17FY_A17FXDC
CABINET DISASSEMBLY INSTRUCTIONS
1. Disassembly Flowchart
This flowchart indicates the disassembly steps for the
cabinet parts and the CBA in order to gain access to
items to be serviced. When reassembling, follow the
steps in reverse order. Bend, route and dress the
cables as they were.
2. Disassembly Method
Note:
(1) Order of steps in procedure. When reassembling,
follow the steps in reverse order. These numbers
are also used as the Identification (location) No. of
parts in figures.
(2) Parts to be removed or installed.
(3) Fig. No. showing procedure of part location
(4) Identification of parts to be removed, unhooked,
unlocked, released, unplugged, unclamped, or
desoldered.
P = Spring, L = Locking Tab, S = Screw,
H = Hex Screw, CN = Connector, N = Nut
e.g. 2(S-2) = two Screws of (S-2),
2(L-2) = two Locking Tabs of (L-2)
(5) Refer to the following "Reference Notes in the
Table."
Step/
Loc.
No.
Part
Fig.
No.
Removal Note
[1]
Stand
Assembly
D1 3(S-1) ---
[2]
Rear
Cabinet
D1
32HFL5763D/F7:
12(S-2), 3(S-3),
3(S-4), 8(S-5), (N-1)
11(L-1), Rear Cover,
Tuner Cover,
RF Connector, Washer
---
32HFL5763L/F7:
12(S-2), 3(S-3),
3(S-4), 8(S-5),
11(L-1), Rear Cover,
Tuner Cover
[3]
Inverter
CBA
D2
D5
7(S-6), CN1001,
CN1003, CN1100,
CN1101, CN1102,
CN1901
---
[1] Stand
Assembly
[2] Rear Cabinet
[9] Speaker
[8] Stand Holder
[3] Inverter CBA
[6] Smart Module
CBA Unit
[5] Digital Main
CBA Unit
[4] Power Supply
CBA
[12] LCD Module
Assembly
[13] Front
Cabinet
[7] PCB Holder
[10] IR Sensor
CBA
[11] Function
CBA
[4]
Power
Supply
CBA
D2
D5
5(S-7), CN601, CN651 ---
[5]
Digital Main
CBA Unit
D2
D5
5(S-8), CN3003,
CN3004, CN3801,
CN3802, CN3901
---
[6]
Smart
Module
CBA Unit
D2
6(S-9),
Separation Sheet
---
[7] PCB Holder D3 9(S-10) ---
[8]
Stand
Holder
D3
2(S-11), 2(S-12),
CL601, AC Inlet
Holder
---
[9] Speaker D4
4(S-13),
Speaker Holder
---
[10]
IR Sensor
CBA
D4
D5
CL103A ---
[11]
Function
CBA
D4
D5
Function Knob,
Knob Frame
---
[12]
LCD
Module
Assembly
D4 3(S-14) ---
[13]
Front
Cabinet
D4 --------------- ---
↓
(1)
↓
(2)
↓
(3)
↓
(4)
↓
(5)
Step/
Loc.
No.
Part
Fig.
No.
Removal Note