6-2 A17FY_A17FX INT
HOW TO INITIALIZE THE SMART MODULE SETTINGS
Note:
Make sure to clone the setting data if necessary before you conduct on this procedure.
Refer to the “HOSPITALITY TV MODE” for further detail.
1. Press [RC5 GUEST] button on the set up remote
control unit.
2. Press [0], [6], [2], [5], [9], [6] and [RECALL/INFO]
buttons on the set up remote control unit in this
order to enter the service mode.
3. Press [K], [L], [B] or [s] button to select “Quality”.
4. Press [K], [L], [B] or [s] button to select “Initialize
Settings” and press the [OK] button.
To Next Page
Loading...
