2012/02/15 14-12 A17FXEL.fm
Electrical Parts
PRODUCT SAFETY NOTE: Products marked with a
# have special characteristics important to safety.
Before replacing any of these components, read
carefully the product safety notice in this service
manual. Don't degrade the safety of the product
through improper servicing.
NOTES:
1. Parts that are not assigned part numbers (---------)
are not available.
2. Tolerance of Capacitors and Resistors are noted
with the following symbols.
3. When you conduct on a component level
repair for the Inverter CBA, make sure to refer
the right Block Diagram/Schematic Diagram/
CBA and Parts List.
For the main CBA, the last digit of the board
number, which is engraved on every board,
should be a number (e.g. BA17F4F0103 2).
For the sub CBA, the last digit of the board
number, which is engraved on every board,
should be an alphabet (e.g. BA17F4F0103 Z).
Different parts from the original model
32HFL5763D/F7 (Serial No. : DS1)
C.....±0.25% D.....±0.5% F.....±1%
G.....±2% J......±5% K.....±10%
M.....±20% N.....±30% Z.....+80/-20%
Ref. No. Description Part No.
SMART MODULE CBA UNIT UPBMATZNW002
DIGITAL MAIN CBA UNIT A17FXMMA-001
To Previous Page
Loading...
