To Next PageTo Next Page
Need help?Do you have a question about the Philips 32PFL3017H/60 and is the answer not in the manual?
Provides technical data and online support links for the television models.
Details various input/output connection types including SCART, HDMI, USB, and antenna.
Essential safety rules to follow during repair procedures, including transformer use and component replacement.
Important cautions regarding ESD, high voltage, and handling of components during repair.
Step-by-step instructions for removing internal components like the rear cover and SSB.
Procedures for reassembling the TV, emphasizing reverse order and EMC foam placement.
Details on accessing and using Service Default Mode (SDM), SAM, CSM, and ComPair.
Information about the ComPair tool for diagnostics, NVM access, and software upgrades.
Steps for checking, downloading, and installing TV software updates via USB.
Explanation of error codes, how to read the error buffer, and defined error types.
Method to diagnose errors using front LED blinking patterns when OSD is unavailable.
Practical advice on NVM editing, common faults like no picture, and speaker handling.
Details on performing software alignments like RGB and White Tone via SAM mode.
Instructions for resetting the NVM on a repaired SSB and setting service data.
Details the MT5366IVGG/B processor and its video/audio processing features.
Detailed block diagram and pinout for the MT5366 main processor (IC U401).
Provides technical data and online support links for the television models.
Details various input/output connection types including SCART, HDMI, USB, and antenna.
Essential safety rules to follow during repair procedures, including transformer use and component replacement.
Important cautions regarding ESD, high voltage, and handling of components during repair.
Step-by-step instructions for removing internal components like the rear cover and SSB.
Procedures for reassembling the TV, emphasizing reverse order and EMC foam placement.
Details on accessing and using Service Default Mode (SDM), SAM, CSM, and ComPair.
Information about the ComPair tool for diagnostics, NVM access, and software upgrades.
Steps for checking, downloading, and installing TV software updates via USB.
Explanation of error codes, how to read the error buffer, and defined error types.
Method to diagnose errors using front LED blinking patterns when OSD is unavailable.
Practical advice on NVM editing, common faults like no picture, and speaker handling.
Details on performing software alignments like RGB and White Tone via SAM mode.
Instructions for resetting the NVM on a repaired SSB and setting service data.
Details the MT5366IVGG/B processor and its video/audio processing features.
Detailed block diagram and pinout for the MT5366 main processor (IC U401).
General| Screen Size | 32 inches |
|---|---|
| Resolution | 1366 x 768 pixels |
| Display Technology | LCD |
| HDMI Ports | 2 |
| USB Ports | 1 |
| HD Type | HD Ready |
| Refresh Rate | 50 Hz |
| Smart TV | No |
| Built-in Wi-Fi | No |
| Energy Efficiency Class | A |
| Contrast ratio (typical) | 1000:1 |
| Response time | 8 ms |
| Brightness | 250 cd/m² |
| Component video (YPbPr/YCbCr) in | 1 |
| SCART ports quantity | 1 |
| Common interface (CI) | Yes |
| RMS rated power | 10 W |
| Number of loudspeakers | 2 |
| Teletext function | Yes |
| Teletext | 1000 pages |
| VESA mounting interfaces | 200 x 100 mm |
| Screen format adjustments | 16:9 |
| Supported video modes | 480i, 480p, 576i, 576p, 720p, 1080i, 1080p |
| Digital signal format system | DVB-T, DVB-C |
