Philips 32PFL3506/F7 - Specifications; Picture and Sound Enhancements; Connectivity Options; Power Requirements

4-1 PL11.0-A_DC
CABINET DISASSEMBLY INSTRUCTIONS
1. Disassembly Flowchart
This flowchart indicates the disassembly steps for the
cabinet parts and the CBA in order to gain access to
items to be serviced. When reassembling, follow the
steps in reverse order. Bend, route and dress the
cables as they were.
2. Disassembly Method
*1: TYPE A
*2: TYPE B
Note:
(1) Order of steps in procedure. When reassembling,
follow the steps in reverse order. These numbers
are also used as the Identification (location) No. of
parts in figures.
(2) Parts to be removed or installed.
(3) Fig. No. showing procedure of part location
(4) Identification of parts to be removed, unhooked,
unlocked, released, unplugged, unclamped, or
desoldered.
P = Spring, L = Locking Tab, S = Screw,
H = Hex Screw, CN = Connector
e.g. 2(S-2) = two Screws of (S-2),
2(L-2) = two Locking Tabs of (L-2)
(5) Refer to the following "Reference Notes in the
Table."
Step/
Loc.
No.
Part
Fig.
No.
Removal Note
[1]
Stand
Assembly
D1 3(S-1) ---
[2]
Rear
Assembly
D1
12(S-2), 2(S-3),
4(S-4), 11(L-1)
---
[3]
Inverter
CBA
D2
D4
7(S-5), CN1001,
CN1003, CN1100,
CN1101, CN1102,
CN1901
---
[4] Jack CBA
D2
D4
2(S-6), CL701B ---
[5]
Power
Supply
CBA
D2
D4
9(S-7), CN101,
CN301, CN302,
CN801, CN802
---
[6]
Digital Main
CBA Unit
D2
D4
2(S-8), 8(S-9),
CN3902
*1
, CN3005
*2
,
Jack Holder, Shield
Box
---
[7] Speaker D3
4(S-10),
Speaker Holder
---
[1] Stand
Assembly
[2] Rear Assembly
[7] Speaker
[3] Inverter CBA
[4] Jack CBA
[6] Digital Main
CBA Unit
[5] Power Supply
CBA
[10] LCD Module
Assembly
[11] Front
Cabinet
[8] IR Sensor
CBA
[9] Function
CBA
[8]
IR Sensor
CBA
D3
D4
CL103A ---
[9]
Function
CBA
D3
D4
Function Knob,
Knob Frame
---
[10]
LCD
Module
Assembly
D3 (S-11) ---
[11]
Front
Cabinet
D3 --------------- ---
↓
(1)
↓
(2)
↓
(3)
↓
(4)
↓
(5)
Step/
Loc.
No.
Part
Fig.
No.
Removal Note