Philips 32PHT5102/98 - Clock and Language

Home or Shop
If the TV is installed in a shop, you can set the TV to
display an in store promotion banner. Picture
style is set to Vivid automatically. Switch off
timer is switched off.
To set the TV to Shop location…
1 - Press

, select General settings and
press

(right) to enter the menu.
2 - Select Location > Shop, and press OK.
3 - Press

(left) repeatedly if necessary, to close
the menu.
If you use the TV at home, set the TV in Home
location.
Shop setup
If the Location is set to Shop, you can set the
availablility of a specific demo for in store use.
1 - Press

, select General settings and
press

(right) to enter the menu.
2 - Select Shop setup and press

(right) to enter
the menu.
3 - Select banner, and select Commercial banner
or Promotional banner as in store demo.
4 - Press

(left) repeatedly if necessary, to close
the menu.
HbbTV
If a TV channel offers HbbTV pages, you must first
switch on HbbTV in the TV settings to view the pages.
1 - Press

, select General settings and
press

(right) to enter the menu.
2 - Select HbbTV, and press OK.
3 - Select On or Off.
4 - Press

(left) repeatedly if necessary, to close
the menu.
If you want to avoid access to HbbTV pages on a
specific channel, you can block the HbbTV pages for
this channel only.
1 - Tune to the channel of which you want to block
the HbbTV pages.
2 - Press

OPTIONS and select HBB TV on this
channel and press OK.
3 - Select Off and press OK.
Factory settings
You can set the TV back to the original TV settings
(the factory settings).
To switch back to the original settings…
1 - Press

, select General settings and
press

(right) to enter the menu.
2 - Select Factory settings and press OK.
3 - Press

(left) repeatedly if necessary, to close
the menu.
Reinstall TV
You can redo a full TV installation. The TV is
completely reinstalled.
To redo a full TV installation…
1 - Press

, select General settings and
select Reinstall TV.
2 - Follow the instructions on screen. The installation
may take a few minutes.
Channel list copy
For more information, in Help, press the colour
key

Keywords and look up Channel List Copy,
copy.
18.6
Clock and language
Clock
Date and time
󾺠In some countries, digital broadcasts do not send
UTC - Coordinated Universal Time information. The
daylight saving change might be ignored and the TV
might show an incorrect time.
When you record programmes - scheduled in the TV
Guide, we recommend not to change the time and
date manually. In some countries, for some network
operators, the Clock setting is hidden to avoid an
incorrect clock setting.
To correct the TV clock automatically...
1 - Press

, select General
settings > Clock > Auto clock mode.
2 - Select Automatic and press OK.
3 - Press

(left) repeatedly if necessary, to close
the menu.
To set the TV clock manually…
1 - Press

, select General
51