8
Bluetooth®
8.1
What You Need
You can connect a wireless device with Bluetooth®
to this TV – a wireless speaker or headphones.
To enable the TV audio on a wireless speaker, you
must pair the wireless speaker with the TV. The TV
can only play the sound on one speaker at a time.
Attention
Before you purchase a wireless Bluetooth® speaker
system, please find out more about the newest
models and look for a device with a low latency
rating. Ask your dealer for advice.
Disclaimer:
Due to the transmission limitations of Bluetooth®
wireless technology, a slight sound delay might occur
when you hear audio from your Bluetooth®
headphone or Bluetooth® speakers.
When this occur, you might see the character moving
his or her mouth but there is a slight delay in spoken
dialog accompany it – commonly known as lip Sync
error.
8.2
Pairing a Device
Position the wireless speaker within a distance of 5
meters from the TV. Read the user manual of the
device for specific information on pairing and on
wireless range. Make sure the Bluetooth® setting on
TV is switched on.
Once a wireless speaker is paired, you can select it to
play the TV sound. When a device is paired, you do
not need to pair it again unless you remove the
device.
To pair a Bluetooth® device with the TV…
1 - Switch on the Bluetooth® device and place it
within range of the TV.
2 - Press MENU > TV
options > Settings > Remote & Accessories and
press OK.
3 - Select Pair and press OK. Follow the
instructions on screen. You will pair the device with
the TV and the TV will store the connection. You
might need to unpair a paired device first if the
maximum number of paired devices was reached.
4 - Press Back, repeatedly if necessary, to close the
menu.
Note:
Only one Bluetooth® sound output can be paired at
a time, if you would like to pair another Bluetooth®
speaker or headphones, please un-pair the current
one first.
8.3
Select a Device
To select a wireless device…
1 - Press MENU > TV
options > Settings > Remote & Accessories and
press OK.
2 - In the list, select the wireless device and
press OK.
3 - Press Back, repeatedly if necessary, to close the
menu.
8.4
Rename a Device
To rename a wireless device…
1 - Press MENU > TV
options > Settings > Remote & Accessories and
press OK.
2 - In the list, select the wireless device and
press OK.
3 - Select Change name and press OK.
4 - Enter a new name for the device.
5 - Press Back, repeatedly if necessary, to close the
menu.
8.5
Remove a Device
You can connect or disconnect a wireless Bluetooth®
device. You can also remove a wireless Bluetooth®
device. If you remove a Bluetooth® device, the
device will be unpaired.
To remove or disconnect a wireless device…
1 - Press MENU > TV
options > Settings > Remote & Accessories and
press OK.
2 - In the list, select the wireless device and
press OK.
3 - Select Unpair and press OK.
4 - Press Back, repeatedly if necessary, to close the
menu.
23
To Next Page
Loading...
