4-1 PL11.3-A_DC
CABINET DISASSEMBLY INSTRUCTIONS
[40PFL4706/F7 (Serial No.: DS1)]
1. Disassembly Flowchart
This flowchart indicates the disassembly steps for the
cabinet parts, and the CBA in order to gain access to
items to be serviced. When reassembling, follow the
steps in reverse order. Bend, route and dress the
cables as they were.
2. Disassembly Method
Note:
(1) Order of steps in procedure. When reassembling,
follow the steps in reverse order. These numbers
are also used as the Identification (location) No. of
parts in figures.
(2) Parts to be removed or installed.
(3) Fig. No. showing procedure of part location
(4) Identification of parts to be removed, unhooked,
unlocked, released, unplugged, unclamped, or
desoldered.
P = Spring, L = Locking Tab, S = Screw,
H = Hex Screw, CN = Connector
e.g. 2(S-2) = two Screws of (S-2),
2(L-2) = two Locking Tabs of (L-2)
(5) Refer to the following "Reference Notes in the
Table."
Step/
Loc.
No.
Part
Fig.
No.
Removal Note
[1]
Arm
Assembly
D1 4(S-1) ---
[2]
Base
Assembly
D1 --------------- ---
[3]
Rear
Cabinet
D1 14(S-2), 4(S-3) ---
[4]
Digital Main
CBA Unit
D2
D5
6(S-4), CN3101,
CN3102, CN3801,
CN3901, Wireless
LAN Adaptor,
Jack Holder A,
Jack Holder B,
Shield Box
---
[5]
Power
Supply
CBA Unit
D2
D5
4(S-5), CN1, CN4,
Separation Sheet
---
[2] Base
Assembly
[3] Rear Cabinet
[10] Function
CBA Unit
[7] Stand Bracket
[6] PCB Holder
[15] LCD Module
Assembly
[8] Speaker
[12] Panel
Holder B
[14] Panel
Holder L
[16] Front
Cabinet
[1] Arm
Assembly
[11] IR Sensor
CBA Unit
[13] Panel
Holder R
[5] Power Supply
CBA Unit
[9] AC Inlet
Holder
[4] Digital Main
CBA Unit
[6] PCB Holder D3 5(S-6) ---
[7]
Stand
Bracket
D3 6(S-7) ---
[8] Speaker D3 --------------- ---
[9]
AC Inlet
Holder
D3 2(S-8), CL601 ---
[10]
Function
CBA Unit
D3
D5
CN4001, Knob Frame,
Function Button
---
[11]
IR Sensor
CBA Unit
D3
D5
Shield Plate ---
[12]
Panel
Holder B
D4 2(S-9), (S-10) ---
[13]
Panel
Holder R
D4 3(S-11) ---
[14]
Panel
Holder L
D4 3(S-12) ---
[15]
LCD
Module
Assembly
D4 2(S-13) ---
[16]
Front
Cabinet
D4 --------------- ---
↓
(1)
↓
(2)
↓
(3)
↓
(4)
↓
(5)
Step/
Loc.
No.
Part
Fig.
No.
Removal Note